Migration behavior of landfill leachate contaminants through alternative composite liners

Four identical pilot-scale landfill reactors with different alternative composite liners were simultaneously operated for a period of about 540 days to investigate and to simulate the migration behaviors of phenolic compounds (phenol, 2-CP, 2-MP, 3-MP, 4-MP, 2-NP, 4-NP, 2,4-DNP, 2,4-DCP, 2,6-DCP, 2,4,5-TCP, 2,4,6-TCP, 2,3,4,6-TeCP, PCP) and heavy metals (Pb, Cu, Zn, Cr, Cd, Ni) from landfill leachate to the groundwater. Alternative landfill liners of four reactors consist of R1: Compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R2: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R3: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + bentonite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn), and R4: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + zeolite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn). Wastes representing Istanbul municipal solid wastes were disposed in the reactors. To represent bioreactor landfills, reactors were operated by leachate recirculation. To monitor and control anaerobic degradation in the reactors, variations of conventional parameters (pH, alkalinity, chloride, conductivity, COD, TOC, TKN, ammonia and alcaly metals) were also investigated in landfill leachate samples. The results of this study showed that about 35-50% of migration of organic contaminants (phenolic compounds) and 55-100% of migration of inorganic contaminants (heavy metals) to the model groundwater could be effectively reduced with the use of bentonite and zeolite materials in landfill liner systems. Although leachate contaminants can reach to the groundwater in trace concentrations, findings of this study concluded that the release of these compounds from landfill leachate to the groundwater may potentially be of an important environmental concern based on the experimental findings.     

The construction productivity debate and the measurement of service qualities

Since the 1960s, researchers have provided short-term and long-term explanations for low productivity growth in the construction industry. In retrospect, the main challenge appears to be the measurement of changes in heterogeneous input and output qualities. The aim here is to review earlier construction productivity research and to compare it with more recent approaches to quality measurement used when analysing services productivity, ultimately intending to provide guidance for using performance data from construction projects. Relying on the EU KLEMS database, industries with similar patterns of productivity growth are identified, primarily the business services industry. In services productivity analyses, the attempts to introduce output quality measures reflecting customer satisfaction are particularly interesting, as this creates a link to productivity effects on clients. A conclusion is that it should be possible to use the increasing volume of performance indicator data collected for construction project benchmarking for extending the range of output quality variables. However, resource constraints imply that it is infeasible to base industry productivity statistics on project level data reflecting customer satisfaction and customer productivity effects.     

The accumulation of La,Ce and Y by Lemna minor and Lemna gibba in the Keban gallery water,Elazig Turkey

This study investigated the phytoremediation ability of Lemna minor and Lemna gibba to accumulate lanthanum, cerium and yttrium from gallery water polluted by metals. L. minor and L. gibba were settled in the mining water and adapted to separate reactors. During the experiment, the water and plant samples were daily taken and the temperature, electric conductivity and pH of the water were daily measured in situ. These plants were firstly washed, dried in and then ashed at 300°C for 24 h in an oven. Both water and ashed plant samples were measured by ICP‐MS to detect the concentrations of lanthanum (La), cerium (Ce) and yttrium (Y). Although these elements are at low concentrations in gallery water, they were accumulated at the highest levels in L. gibba and in L. minor. This study showed that both plants have high ability to remove lanthanum, cerium and yttrium in gallery water polluted by different elements.     

Fuzzy approach for preliminary design of weak rock slopes in lignite mines

Rock slope failure modes are either driven by structurally controlled mechanisms (planar, wedge, or toppling failure) or lean upon the highly jointed or weak rock mass (circular failure). Developing practical tools for preliminary slope design is a popular topic among geotechnical society. This study proposes a practical methodology to predict a safe overall slope angle for weak rock slopes of lignite mines. Rock mass rating (RMR) and slope mass rating (SMR) classification systems can be remarkably misleading for weak rocks. Fuzzy modification was proven to improve rock and slope quality predictions. In addition, structurally controlled failures can be estimated more precisely. Later, a popular slope performance chart of Bieniawski that is based on RMR was modified by the fuzzy approach, and the computer models of a weak rock mass failure in a Turkish lignite mine are presented. The modified methodology was proven to be better suited to the weak rock conditions.     

Online monitoring of diallyldimethylammonium chloride polymerization

Diallyldimethylammonium chloride, which is an acidic salt with numerous applications, was polymerized in water at three different monomer concentrations and at three different pHs which the monomer is in charged form. Reactions were investigated by the automatic continuous online monitoring of polymerization technique. Conversion, molecular weight, and reduced viscosity were monitored. The reaction is found to be second‐order with respect to monomer. Rate constants and molecular weights tend to increase with pH and concentration. POLYM. ENG. SCI., 54:1350–1356, 2014. © 2013 Society of Plastics Engineers     

Preparation of N‐doped graphene powders by cyclic voltammetry and a potential application of them: Anode materials of Li‐ion batteries

Nowadays, doped graphenes are attracting much interest in the field of Li‐ion batteries since it shows higher specific capacity than widely used graphite. However, synthesis methods of doped graphenes have secondary processes that requires much energy. In this study, in situ synthesis of N‐doped graphene powders by using of cyclic voltammetric method from starting a graphite rod in nitric acid solution has been discussed for the first time in the literature. The N‐including functional groups such as nitro groups, pyrrolic N, and pyridinic N have been selectively prepared as changing scanned potential ranges in cyclic voltammetry. The electrochemical performance as anode material in Li‐ion batteries has also been covered within this study. N‐doped graphene powders have been characterized by electrochemical, spectroscopic, and microscopic methods. According to the X‐ray photoelectron spectroscopy and Raman results, N‐doped graphene powders have approximately 16 to 18 graphene rings in their main structure. The electrochemical analysis of graphene powders synthesized at different potential ranges showed that the highest capacity was obtained 438 mAh/g after 10 cycles by using current density of 50 mA/g at N‐GP4. Furthermore, the sample having higher defect size shows better specific capacity. However, the more stable structure due to oxygen content and less defect size improves the rate capabilities, and thus, the results obtained at high current density indicated that the remaining capacity of N‐GP1 was higher than the others.